Acapela™

Fungicide

group

Corteva Agriscience™ Acapela™ fungicide has one-of-a-kind movement properties that help provide complete coverage and superior protection to deliver healthier crops and higher yield potential. Acapela protects canola, soybeans, and corn from key diseases, such as sclerotinia white mould, Northern corn leaf blight and Tar spot.

Because white mould or sclerotinia can cause a significant yield reduction in both canola and soybeans, it is vital that growers take a proactive approach to managing the disease.

White Mould & Sclerotinia: Same Disease. Big Problem for Farmers

Benefits

Unique movement properties

Four movement properties quickly and efficiently surround, penetrate and protect the leaf and stem to prevent infection on the entire plant, leading to more consistent performance and higher yield potential.

More complete coverage

Rapid absorption moves Acapela quickly into and within each plant, allowing application to occur even when field conditions are challenging.

Unique action

Picoxystrobin is an advanced Group 11, strobilurin fungicide. Acapela is a Group 11 fungicide product that provides reliable protection against sclerotinia rot (white mould).

Videos

Corteva Agriscience Acapela Fungicide is proven to protect against yield loss and controls sclerotenia in canola.

Diseases Controlled and Application Information

Refer to the Acapela™ fungicide label for complete use instructions.

Almond

Diseases: Coryneum Blight/Shothole, Brown rot, Blossom Blight

Rates: 0.24 to 0.35L/ac (0.6-0.88L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

Additional Information: Do NOT apply by air.

Alfalfa

Diseases: Common leaf spot, Stemphylium leafspot

Rates: 0.18 to 0.35L/ac (0.44-0.88L/ha)

Application Information: Begin applications in the spring at green-up and once 1-3 new leaves have grown after each cutting. Initiate applications prior to disease development and no later than 14-days prior to cutting. Use higher rate and shorter interval when disease pressure is high.

Bulb Vegetables

Includes the following: Garlic bulb, Onion bulb, Onion, Chinese bulb, Fresh Green Onion, Macrostem Onion, Pearl Onion, Potato Onion bulb, Tree Onion Tops, Welsh Onion Tops, Shallot bulb, Shallot Fresh, Leaves Cultivars, varieties, and /or hybrids of these.

Diseases: Purple blotch, Botrytis neck rot

Rates: 0.18 to 0.35L/ac (0.44-0.88L/ha)

Diseases: Botrytis Blight*

Rates: 0.24 to 0.35L/ac (0.6-0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7- to 14-day interval. Use higher rate and shorter interval when disease pressure is high.

Canola

Diseases: Sclerotinia stem rot (white mould – Sclerotinia sclerotiorum)

Rates: 0.323L to 0.486L/ac (0.80-1.2L/ha)

Application Information: Apply at 20-50% bloom prior to disease development to control white mould. Use the higher rate or shorter interval when disease pressure is high. Under high disease pressure, make a second application of another fungicide, from a different fungicide group, 7-14 days later. A second application of Acapela Fungicide can only be carried out if both applications are at the lowest rate and if sprays are not sequential.

Cereals (Barley, Oats, Rye, Triticale, Wheat)

Diseases: Crown rust (oats), Leaf rust (wheat, rye and triticale), Net blotch (barley), Powdery mildew (cereal grains), Scald (barley and rye), Septoria leaf blotch (wheat, rye, barley and triticale), Stripe rust (cereal grains), Tan spot (wheat)

Rate: 0.18 to 0.35 L/ac (0.44 to 0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

To optimize yields in cereals, it is important to protect the flag leaf from foliar diseases. For optimizing yield and flag leaf disease control, apply Acapela™ at Feeke’s 9, ‘flag leaf out’.

Do not apply after flowering (Feekes 10.5).

Corn (Field, Sweet, Seed, Popcorn)

Diseases: Northern corn leaf blight

Rates: 0.21 to 0.32 L/ac (0.53 to 0.8 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high. For optimal disease control, apply at full tassel (VT) to milk stage (R3) corn.

Diseases: Tar Spot

Rates: 0.32L/ac (0.8L/ha)

Dry Legumes

Includes the following: Adzuki bean, Blackeyed pea, Broad bean (dry), Catjang, Chickpea, Cowpea, Crowder pea, Field bean, Field pea, Grain lupin, Guar, Kidney bean, Lablab bean, Lentil, Lima bean, Moth bean, Mung bean, Navy bean, Pigeon pea, Pinto bean, Rice bean, Southern pea, Sweet lupin, Tepary bean, Urd bean, White lupin, White sweet lupin

Diseases: Mycosphaerella¹ blight (field peas), Asian soybean rust, Anthracnose (lentils and dry beans), Ascochyta blight (lentils)

Rates: 0.24 to 0.35 L/ac, (0.6 to 0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

Diseases: Sclerotinia rot¹ (white mould)

Rates: 0.35 L/ac (0.88 L/ha)

Application Information: For white mould, make initial preventive application at beginning bloom and follow with 2nd application 7 to 10 days later at full bloom.

Flax

Diseases: Pasmo

Rate: 0.24 to 0.35L/ac (0.6-0.88 L/ha)

Application Information: Begin application prior to disease development or 7-10 days after flower initiation (approx. 20% bloom) and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high

Grass, Grown for Seed

Diseases: Yellow Rust

Rates: 0.18 to 0.35L/ac (0.44-0.88L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

Potatoes

Diseases: Early blight, White mould

Rates: 0.24 to 0.40L/ac (0.6-1L/ha)

Diseases: Late blight

Rates: 0.18 to 0.40L/ac (0.44-1L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 10 day interval. Use higher rate and shorter interval when disease pressure is high.

Soybeans

Diseases: Asian soybean rust, Brown spot (Septoria) , Frogeye leafspot (Cercospora sojina)

Rates: 0.18 to 0.35 L/ac (0.44 to 0.88 L/ha)

Application Information: Begin applications prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

For foliar diseases, the optimal time for application is typically at the R2 to R3 growth stage (full bloom to beginning pod).

Diseases: Sclerotinia stem rot¹ (white mould)

Rates: 0.35 L/ac (0.88 L/ha)

Application Information: For white mould, make initial preventative application at R1 to R2 (beginning to full bloom) and follow up with 2nd application 7 to 10 days later.

Sunflower

Diseases: Alternaria leaf spot, Stem Canker, Black Stem

Rates: 0.24 to 0.35L/ac (0.6-0.88 L/ha)

Diseases: Sclerotinia head & stem rot¹

Rates: 0.323 to 0.40L/ac (0.8-1L)

Application Information: Begin applications prior to disease development an continue on a 7-10 day internal. Use higher rate and shorter interval when disease pressure is high.

Sugar Beet

Diseases: Leaf Spot, Powdery Mildew, Suppression of Rust

Rates: 0.24 to 0.40L/ac (0.6-1L/ha)

Application Information: Begin applications prior to row closure and prior to disease development and continue on a 7 to 14 day interval. Use higher rate and shorter interval when disease pressure is high.

Diseases: Rhizoctonia root and crown rot¹

Rates: 12.2 ml per 100 m of row

Application Information: Apply as a banded foliar application at the 4 to 6 leaf stage.

Additional Information: Do NOT apply by air.

¹Suppression

Registrations

Registered across Canada for Sprayer and aerial application.

Registered
Unregistered

Technical Specifications

Fungicide Group

Group 11
Application Method

Acapela fungicide can be applied by ground or air, except as otherwise directed, using sufficient water to obtain thorough coverage of plants.
Packaging

2 x 9.6 L jugs or 115.2 L drum
Crop Rotation

Any crop the following year.
Mixing Instructions

1. Shake well before use.

2. Fill clean spray tank ¼ – ½ full of water.

3. While agitating, add the required amount of Acapela fungicide, continuing agitation until the product is completely dispersed.

4. Continue filling the tank with agitation. Mix thoroughly to fully disperse the fungicide; once dispersed continued agitation is required. Use mechanical or hydraulic means; do not use air agitation.
Rates
- Canola:
  - 0.323 L/ac (30 ac/jug or 360 ac/drum)
- Cereals:
  - 0.192 L/ac (50 ac/jug or 600 ac/drum)
- Corn:
  - 0.213 to 0.320 L/ac (30 to 45 ac/jug or 360 to 541 acres/drum)
- Pulse crops: (peas, lentils, chickpeas, dry beans)
  - 0.240 L/ac (40 ac/jug or 480 ac/drum)
  - Sclerotinia rot – white mould: 0.352 L/ac (27 ac/jug or 325 ac/drum)
- Soybeans:
  - Sclerotinia rot – white mould: 0.352 L/ac (27 ac/jug or 325 ac/drum),
  - Asian soybean rust, frogeye leafspot, septoria brown spot: 0.240 to 0.352 L/ac (27 to 40 ac/jug or 325 to 480 ac/drum)
Water volume
- Ground: 110 L/ha (10 gal/ac) minimum
- Air: 50 L/ha (4.5 gal/ac) minimum
Application Timing

When to apply

Refer to the Acapela label for complete use instructions.

Rainfast

1 hour
Grazing
- In canola, the minimum time between application and harvest is 28 days.
- In dry legumes, the minimum time between application and harvest of seed is 14 days; vines and hay is 0 days.
- In cereal grains, the minimum time between application and harvest of grain is 45 days.
- In corn, the minimum time between application and grain or ear harvest is 7 days.
- In soybeans, the minimum time between application and harvest is 14 days.