Styrofoam™ Brand Cladmate™ CM20

The XPS solution when a higher compressive strength is not required

styrofoam-brand-cladmate-cm20-product-logo-image1.jpg

Styrofoam™ Brand Cladmate™ CM20

The XPS solution when a higher compressive strength is not required

<br><b>DuPont™ Styrofoam™ Brand CM20 Extruded Polystyrene (XPS) Insulation</b> is a moisture-resistant, durable and lightweight extruded polystyrene foam board for interior frame wall sheathing, exterior or interior masonry wall insulation in new or retrofit construction, as well as residential basement floor slab insulation. <br><br> The closed-cell structure of <b>Styrofoam™ Brand CM20 XPS Insulation</b> boards helps ensure exceptional long-term thermal performance and high moisture resistance. Sized to fit snugly between wall ties, <b>Styrofoam™ Brand CM20 XPS Insulation</b> is also easy to handle, cut and install, helping to save time and money on the job site.
 
 
 
 
 
 

Features & Benefits 

 
 
 
 
 
 

Specifications

 
 
 

Standard Sizes

Thickness Width Length R-Value Edge Treatment
1.0 in. 2 ft. 8 ft. 5.0 4-Sided Shiplap
1.0 in. 2 ft. 8 ft. 5.0 Butt Edge
1.0 in. 4 ft. 8 ft. 5.0 4-Sided Shiplap
1.0 in. 4 ft. 9 ft. 5.0 2- Sided Shiplap
1.5 in. 2 ft. 8 ft. 7.5 Butt Edge
1.5 in. 2 ft. 8 ft. 7.5 4-Sided Shiplap
1.5 in. 4 ft. 8 ft. 7.5 4-Sided Shiplap
1.5 in. 4 ft. 9 ft. 7.5 2- Sided Shiplap
2.0 in. 2 ft. 8 ft. 10.0 Butt Edge
2.0 in. 2 ft. 8 ft. 10.0 4-Sided Shiplap
2.0 in. 4 ft. 8 ft. 10.0 Butt Edge
2.0 in. 4 ft. 8 ft. 10.0 4-Sided Shiplap
2.5 in. 2 ft. 8 ft. 12.5 2-Sided Shiplap
3.0 in. 2 ft. 8 ft. 15.0 Butt Edge
3.0 in. 2 ft. 8 ft. 15.0 4-Sided Shiplap
3.0 in. 4 ft. 8 ft. 15.0 Butt Edge
4.0 in. 2 ft. 8 ft. 20.0 Butt Edge

Note: Please be advised that additional sizes may be available. Availability of all sizes varies by region and is subject to change. For further information, please contact your local DuPont Sales Representative or call us at 1-866-338-7668.

 
 
 

Testing

<b>Styrofoam™ Brand CM20 XPS Insulation</b> exhibits physical properties as indicated in the table below when tested as represented. Review all instructions and (Material) Safety Data Sheet ((M)SDS) before use. Please contact DuPont at 1-833-338-7668 when additional guidance is required for writing specifications that include this product.

TEST METHOD TEST TITLE PROPERTY RESULTS
FIRE
CAN/ULC-S102.2 Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies Surface Burning Characteristics Flame Spread - 295
Smoke Developed - 635
THERMAL
CAN/ULC-S770 Standard Test Method for Determination of Long-Term Thermal Resistance of Closed-Cell Thermal Insulating Foams Long-Term Thermal Resistance @ 23.8 °C (75°F) mean temp1 1.72 m2·°C/W
ASTM C5182 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus Thermal Resistance per inch, @ 75°F mean temp. 5.0 ft2•h•°F/Btu, R-value3
min. (0.88 RSI)
ASTM D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging Change in Dimensions 1.5 % linear change, max.
STRENGTH
ASTM C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation Flexural Strength 303 kPa (44 psi), min.
WATER
ASTM D2842 D2842-Test Method for Water Absorption of Rigid Cellular Plastics Water Absorption 0.7 % by volume, max.
ASTM E96 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials Water Vapor Permeance5 64 ng/Pa•s•m2 (1.2 perm), max.

1Long-term predicted thermal resistance value for 50 mm thickness.

2Thermal values are consistent with the criteria of ASTM C578 and are not assessed by the CCMC. Depending on the product, a 15-, 30- or 50- year limited thermal warranty is available.

5Water vapor permeance varies with product type and thickness. Values are based on the desiccant method, and they apply to insulation 25.4 mm (1.0-inch) in thickness. Thicker products have lower permeance.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

FAQ

What are the types for DuPont™ Styrofoam™ Brand Extruded Polystyrene Foam Insulation products based on CAN/ULC S701?
Styrofoam™ Brand Extruded Polystyrene (XPS) Insulation products available in Canada fit into the following types:

Type 2 Styrofoam™ Brand Panelmate™ XPS Insulation

Type 3 Styrofoam™ Brand Cavitymate™ XPS Insulation Styrofoam™ Brand Cavitymate™ Ultra XPS Insulation Styrofoam™ Brand Cladmate™ CM20 XPS Insulation Styrofoam™ Brand Panelmate™ XPS Insulation

Type 4 Styrofoam™ Brand SM XPS Insulation Styrofoam™ Brand Roofmate™ XPS Insulation Styrofoam™ Brand Highload 40 XPS Insulation Styrofoam™ Brand Highload 60 XPS Insulation Styrofoam™ Brand Highload 100 XPS Insulation

 
 
 
 
 
 

How can we help you?