Convenient to use and quick to cure, DuPont™ Froth-Pak™ Foam Sealant is a polyurethane foam that’s ideal for filling gaps less than four-inches wide in places such as wall cavities, rim joists, and roof/wall junctures.
Froth-Pak™ Foam Sealant
Froth-Pak™ Foam Sealant is a two-component, quick-cure polyurethane foam that fills cavities, penetrations and cracks. It provides a continuous barrier against air infiltration and helps seal out moisture, dust, pests and smoke. Primarily used to seal gaps less than 4" wide.
Decrease load on HVAC system |
|
Reduces energy consumption |
|
  | Method | Unit | Value |
---|---|---|---|
Flame Spread / Smoke Developed<sup>1</sup> | ASTM E84 | - | ≤25 |
Flame Spread / Smoke Developed<sup></sup> | UL 723 | - | ≤450 |
Nominal Density<sup>2</sup> | ASTM D1622 | lb/ft2 | 1.75 |
Thermal Resistance<sup></sup> | ASTM C518 | ft2•h•°F/Btu. R-value, min. | 6.6 |
Water Vapor Permeance<sup></sup> | ASTM E96 | @ 1 in. | 3.13 |
Water Absorption<sup></sup> | ASTM D2842 | % by volume | 5.44 |
Air Permeability<sup></sup> | ASTM E283 | @ 0.5” thick, ft3 /min•ft2 @ 75 Pa | 0 |
ASTM E2178 | @ 1” thick, l/min @ 75 Pa | 0 | |
Dimensional Stability<sup></sup> | -40°F/amb RH @ 2 wks | - | 0.36 |
-40°F/amb RH @ 2 wks | - | 0.36 | |
-40°F/amb RH @ 2 wks | - | 0.36 | |
-40°F/amb RH @ 2 wks | - | 0.36 | |
ASTM D2126 | % volume change | ||
Compressive Strength<sup></sup> | ASTM D1621 | lb/in2 , parallel | 23.4 |
Flexural Strength<sup></sup> | ASTM C203 | lb/in2 , parallel | 22.7 |
Tensile Strength<sup></sup> | ASTM 1623 | lb/in2 , parallel | 36 |
Shear Strength<sup></sup> | ASTM C273 | lb/in2 , parallel | 12.7 |
Maximum Service Temperature<sup></sup> | - | °F | 240 |
Width | Length | Packaging | Dispensing method |
---|---|---|---|
0 | 0 | Each | GHA |
0 | 0 | Each | GHA |
0 | 0 | Each | GHA |